These are the most commonly asked questions about DeepPCB. Can't find what you're looking for? Let's chat!
Getting started
8 questions
What is DeepPCB?
DeepPCB is an AI engine for PCB placement and routing, trained with reinforcement learning. You upload a placed board from the EDA tool you already use and keep the nets you want to route yourself. DeepPCB routes the rest to your rules and returns a DRC-clean board.
How do I use DeepPCB?
Sign up at app.deeppcb.ai and upload your board file. Cooper checks the setup, then you run placement and/or routing. When it’s done, you review the revisions and download the result back into your EDA tool. You can also run DeepPCB from the KiCad plugin, the API or MCP.
Yes. Every new account gets 30 free minutes, with no credit card needed. The free trial covers 1 board with up to 4 layers, 150 airwires and 100 components.
Which EDA tools and file formats do you support?
Native upload: Altium (.pcbdoc, saved as binary PCB 6.0), KiCad (.kicad_pcb + .kicad_pro + .kicad_sch), Zuken (.dsgf/.pcf + .ftf, plus the .rulf rules file — strongly recommended, or every net falls back to 0.15 mm), EasyEDA Standard (.json) and Pro (.epro; .epro2 coming soon), and DeepPCB (.deeppcb).
Through Specctra DSN: OrCAD, Allegro, PADS, Zuken CR-3000/CR-5000, EAGLE, Proteus and any other tool that exports DSN.
Is there a KiCad plugin?
Yes. The plugin is free and open source (Apache-2.0). Press Route in the KiCad toolbar and the routes land in the project you have open. Each run arrives as a single undo step, so you can take it all back in one keystroke. Cooper is also built into the plugin. For now you install it from the GitHub release; an official listing in KiCad’s plugin manager is coming.
A Route button inside Altium Designer is coming, and founding users get it first. Until then, you can upload your .pcbdoc to the web app, or open it in KiCad and route it with the plugin.
Download any revision in the format that matches your upload: KiCad files, Altium PCB Doc, Zuken or Specctra SES. Altium boards can also come back as an Altium Session (.rte), and every board can be downloaded as a DeepPCB file (.deeppcb) to re-upload later. There’s no limit on downloads.
How do I review results?
In the web app you can step through each revision and compare them on completion, via count and total wire length. You can also filter anomalies and highlight individual nets.
Cooper (AI assistant)
8 questions
What is Cooper?
Cooper is the AI agent built into DeepPCB: a layout reviewer that gives your setup a senior set of eyes, without waiting in line for one. It reads your board, finds setup mistakes that would lead to a respin, and fixes them with you before you route. Cooper is available to all users, in the web app and in the KiCad plugin.
How is Cooper different from a general-purpose AI chatbot?
Cooper is built to get you to a finished board, not to keep you talking. It answers from your board’s actual design rules instead of guessing. In one example, it read the board’s 150 µm default clearance, calculated a 62 µm minimum and updated the constraint in real time.
Does Cooper do the routing itself?
No. Cooper sets up and drives the work, and DeepPCB’s reinforcement-learning engine does the routing. Cooper never changes your connectivity. On one example board, all 98 airwires routed in a single pass in about 2 minutes.
What does Cooper check before routing?
Net classes, differential pairs, planes, clearances and the stackup, plus issues like decoupling capacitors, reference planes and USB impedance. It then sums up what’s wrong in plain language. On one example board, Cooper flagged four setup problems that a DRC pass would have missed, before a single trace was routed.
Can I control the design by chatting with Cooper?
Yes. Tell it what you want in plain language, and it keeps track of what’s routed, what’s protected and what remains. For example:
Mark the USB nets as a differential pair
Add a ground plane on In1.Cu — or remove one, or split a layer between two nets
Create a net class for the USB nets, or a via definition to go with it
Make In1.Cu a power layer, or change which nets it accepts
Protect the oscillator traces, then route the rest
Changes land as soon as Cooper answers. Board-setup edits are blocked while a job is running, so Cooper offers to stop the run, apply the change and resume.
Can Cooper route only part of my board?
Yes. Cooper can run the engine on the whole board, only the high-speed nets, or a single net by name. Ask it to start with the differential pairs and high-speed signals, for example, and it finds those nets, sets their priority, launches a scoped routing job and reports progress in the Solutions panel.
Which EDA tools does Cooper work with?
Cooper works on the design files you already have, so you don’t need to switch tools. It runs in the web app on any board you upload, including Altium and KiCad files, and inside KiCad through the DeepPCB plugin.
Who is Cooper for?
Engineers who aren’t dedicated layout specialists, and teams whose PCB designers have a long layout queue. With Cooper, every layout gets a review before it routes, without adding headcount.
Routing and capabilities
8 questions
What can DeepPCB route?
Signal and power nets, following your net classes and clearances
Differential pairs
Through-hole, blind, buried and at-SMD vias
Multiple power and ground planes
Boards of up to 8 layers
What doesn't DeepPCB handle yet?
DDR, length matching and skew, crosstalk, complex BGA fanout, advanced impedance control and RF-specific constraints. Route these nets in your own tool before uploading, and DeepPCB will route around them.
Can I keep the nets I routed by hand?
Yes, but protection is not automatic — a routing run may re-route or remove any copper that is not protected. Whether the locks you set in your EDA tool survive the upload depends on the format:
KiCad ((locked yes)), Specctra DSN (a wire or via marked protect) and DeepPCB files — locked tracks and vias arrive protected.
Altium, EasyEDA and Zuken — tracks and vias arrive unprotected. Protect them in the board editor before you run: Global Actions → Protect, with Wires and Vias ticked, or right-click individual items.
Whatever the format, anything you did not lock arrives unprotected. Components are the exception: they are protected on import, so a routing job never moves parts.
Does DeepPCB do component placement?
Yes. AI placement arranges components to make routing easier. Uploading your schematic gives better results, and you can protect any parts you want left in place.
How big can my board be?
On pay-as-you-go: up to 8 layers, 1,200 airwires, 1,000 components and 2,200 pins. For larger boards, contact support@deeppcb.ai or ask about Enterprise.
Minutes for a typical board, a few hours for a large one. On paid plans you can stop and resume a run at any time, and the best solution so far is always available.
What's the difference between DeepPCB and other autorouters?
Typical autorouters rely on heuristics that are fast but sub-optimal, or on solvers that don’t scale, and they start from scratch on every board. DeepPCB learns from past experience, so AI inference delivers high-quality results fast. Published benchmarks show each board with its stackup, its constraints and its result.
Yes. Get an API key at app.deeppcb.ai/integration to submit boards and fetch results from your own tools, with webhooks for delivering results. The MCP server lets AI assistants like Claude or Cursor send boards to DeepPCB directly.
On the hosted service, yes. Your designs stay private and are never shared or sold. For boards that can’t leave your network, DeepPCB Enterprise runs on-prem or in your private cloud, with contractual IP terms.
How do I report a bug?
Email support@deeppcb.ai with your board ID, what happened and what you expected. Attach the board file if you can.